Scalextric 1/32 Slot Car Easy Fit Plug Converts DPR Car to Digital

This is the Scalextric 1/32 Slot Car Easy Fit Plug Converts Standard Chassis DPR Car to Digital. The conversion only requires a small screw-driver and takes less than sixty seconds to perform.

This is for standard chassis DPR cars, NOT the F1/single-seaters. Those require the F1 DPR chip, Scalextric part C8516.

Scalextric Digital
Scalextric Digital represents a ground breaking step forward in the way Scalextric is played. Now, with the DIGITAL system, up to six cars can race on one lane*. At the press of a button, drivers can switch lanes for overtaking and blocking!

EasyFit Digital Plug
Most cars produced from 2007 onwards will have, as standard, a socket on the car where the EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout. C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars.

To Convert a DPR car
1. Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug.
2. Connect the EasyFit Digital Plug to the braid-to-motor wiring plug.
3. Replace the retaining screw to secure the EasyFit Digital Plug to the chassis.
Features

The EasyFit Digital Plugs offer a ‘plug and play’ solution – DPR Scalextric cars to be digitized in under sixty seconds. Each C8515 EasyFit Digital Plug can be transferred easily from one car to another. There is no need for a soldering iron or modelling expertise.

Note
C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars.

To convert open-wheeled single-seat F1 style DPR Scalextric cars to Digital, use C8516 F1 EasyFit Digital Plug.

Many non-DPR Scalextric cars can be converted to Digital using Digital Chips C7005 and C7006.

* Four car and six car powerbases available